PetSafe Microchip Cat Flap (PPA19-16145)

Give your cat the freedom to go outside for fresh air and exercise during the day - but also have the peace of mind knowing that your cat is safe inside at night.

No need for a collar, the PetSafe Microchip Cat Flap works with advanced selective entry technology that identifies your cat's microchip. As your cat approaches the door, the door automatically opens, allowing your cat to enter. Once your cat has passed through the door, the flap will automatically lock. The door will remain locked until it identifies another microchip. This ensures any stray pets, possums, pests and other wildlife are kept outside of your home.

The PetSafe Microchip Cat Flap reads the most common type of microchip in cats - FDX-B (15 digits). Please note that microchip numbers with 10 digits, letters, and those starting with 977xxxxxxxxxxxx and 98514xxxxxxxxxx are not compatible with PetSafe microchip pet doors.

The door is powered by 4 AA Alkaline batteries (estimated battery life of 12 months). The low battery indicator light will flash red when it's time to change the batteries.

 

Features

Selective Entry - The PetSafe Microchip Cat Door uses RFID to read your cat's microchip, allowing your cat to enter and leave while keeping stray animals out of your home.

Add up to 40 Pets - The door is capable of reading up to 40 pets! 

Microchip Compatibility - The RFID (radio frequency identification) technology reads FDX-B microchip numbers with 15 digits. Please note that microchip numbers with 10 digits, 

Energy Efficient - The PetSafe Microchip Pet Door features weather stripping and two magnetic locking points increasing insulation and keeping out draughts.

Manual Lock - The 4-way manual lock allows you to control your cat's access. Choose from; 'Fully Locked', 'Out Only', 'In Only', 'In or Out'.

Battery Powered - The door is powered by 4 AA alkaline batteries (not included). 

Low Battery Indicator - When it's time to replace the batteries, the low battery indicator will flash red.



PetSafe Microchip Cat Flap (PPA19-16145) Video


Product Manual - PetSafe Microchip Cat Flap
 

 

Product Specifications

Pet type Cats
Suitable pet size Less than 7kg
Maximum no. of pets 40 microchipped pets
Frame size (W x H) 220mm x 239cmm
Flap size (W x H) 146mm x 135mm
Maximum pet shoulder width 15cm
Pet access via FDX-B (15-digit) Microchip
Suitable for wooden doors Yes
Suitable for single-glazed glass Yes
Suitable for double glazed glass Yes (with installation adaptor)
Suitable for doors with metal Yes (with installation adaptor)
Suitable for walls Yes (with installation adaptor)
Suitable for brick walls No
Suitable for patio/sliding doors No
Available colours White
Powered by Power adaptor

 

  • For installation on walls, double glazed glass, and doors with metal on the inside or outside, you will need an installation adaptor. This can be purchased from PetSafe's website.

  • 1 x PetSafe Microchip Cat Flap - PPA19-16145
  • Required 4 AA Alkaline batteries (not included)

 

*Please read the manufacturer safety and installation instructions carefully prior to installation.

SKU RPG035
Barcode # 729849161450
Brand Staywell
Shipping Weight 1.6650kg
Shipping Width 0.160m
Shipping Height 0.240m
Shipping Length 0.240m

Be The First To Review This Product!

Help other Ready Pet Go users shop smarter by writing reviews for products you have purchased.

Write a product review